Windsurfing

10 threaded inserts made of anodized brass for windsurf fins.12mm outer diameter, 6mm thread (M6)The thread inserts in windsurfing fins often break due to frequent use and salt water. With the help of a screwdriver you can replace the defective thread of most commercially available fins.Manufacturer: TekknosportMaterial: Chrome anodized brassScope of delivery: 10 threaded inserts Tekknosport

10 threaded inserts made of anodized brass for windsurf fins.9mm outer diameter, 6mm thread (M6)The thread inserts in windsurfing fins often break due to frequent use and salt water. With the help of a screwdriver you can replace the defective thread of most commercially available fins.Manufacturer: TekknosportMaterial: Chrome anodized brassScope of delivery: 10 threaded inserts Tekknosport

Disk for Windsurf Mastbases Tekknosport

Ersatz Clip für Tekknosport Mastextensions mit Pin System.Lieferumfang: Roter Clip mit Metallbügel, Feder Tekknosport

Seaweed fin for windsurfing boards.In all shapes, the characteristics of the conventional lines have been taken and efficiently improved for use in seagrass. The robust G-10 material tolerates loads and groundings better than any other fin material.This fin is especially well suited in seagrass infested or knee deep areas. Material: Epoxy G-10Draft: 400mmBox System: PowerboxWith insert for 6mm screws M6For the required length of the fin screw, please contact the manufacturer of your board.Content of delivery: Fin with fin cover without fin screwLieferumfang: Finne mit Finnencover ohne Finnenschraube T-Zone

Small Wave fin for Single Fin Windsurf Boards or large fin to be used as a Twinser Setup. Lots of rake for maximum maneuverability and agile handling.This fin line provides good output for all wave conditions. Suitable for all flat water to wave conditions.Material: Epoxy Composite MoldedDeep: 200mmFin box system: US Box T-Zone fins are an OEM supplier product and equivalent to the accessory fins of most production boards in the windsurfing industry.Scope of delivery: one fin without finscrew T-Zone

Wave fin for Single Fin Windsurf Boards. Lots of rake for maximum maneuverability and agile handling.This fin line provides good output for all wave conditions. Suitable for all flat water to wave conditions.Material: Epoxy Composite MoldedDeep: 210mmFin box system: US Box T-Zone fins are an OEM supplier product and equivalent to the accessory fins of most production boards in the windsurfing industry.Scope of delivery: one fin without finscrew T-Zone

Wave fin for Single Fin Windsurf Boards. Lots of rake for maximum maneuverability and agile handling.This fin line provides good output for all wave conditions. Suitable for all flat water to wave conditions.Material: Epoxy Composite MoldedDeep: 210mmFin box system: US Box T-Zone fins are an OEM supplier product and equivalent to the accessory fins of most production boards in the windsurfing industry.Scope of delivery: one fin without finscrew T-Zone

Wave fin for Single Fin Windsurf Boards. Lots of rake for maximum maneuverability and agile handling.This fin line provides good output for all wave conditions. Suitable for all flat water to wave conditions.Material: Epoxy Composite MoldedDeep: 210mmFin box system: US Box T-Zone fins are an OEM supplier product and equivalent to the accessory fins of most production boards in the windsurfing industry.Scope of delivery: one fin without finscrew T-Zone

Wave fin for Single Fin Windsurf Boards. Lots of rake for maximum maneuverability and agile handling.This fin line provides good output for all wave conditions. Suitable for all flat water to wave conditions.Material: Epoxy Composite MoldedDeep: 220mmFin box system: US Box T-Zone fins are an OEM supplier product and equivalent to the accessory fins of most production boards in the windsurfing industry.Scope of delivery: one fin without finscrew T-Zone

Wave fin for Single Fin Windsurf Boards. Lots of rake for maximum maneuverability and agile handling.This fin line provides good output for all wave conditions. Suitable for all flat water to wave conditions.Material: Epoxy Composite MoldedDeep: 220mmFin box system: US Box T-Zone fins are an OEM supplier product and equivalent to the accessory fins of most production boards in the windsurfing industry.Scope of delivery: one fin without finscrew T-Zone

Wave fin for Single Fin Windsurf Boards. Lots of rake for maximum maneuverability and agile handling.This fin line provides good output for all wave conditions. Suitable for all flat water to wave conditions.Material: Epoxy Composite MoldedDeep: 220mmFin box system: US Box T-Zone fins are an OEM supplier product and equivalent to the accessory fins of most production boards in the windsurfing industry.Scope of delivery: one fin without finscrew T-Zone

Wave fin for Single Fin Windsurf Boards and Stand up Paddle Boards. Lots of rake for maximum maneuverability and agile handling.This fin line provides good output for all wave conditions. Suitable for all flat water to wave conditions.Material: Epoxy Composite MoldedDeep: 220mmFin box system: US Box T-Zone fins are an OEM supplier product and equivalent to the accessory fins of most production boards in the windsurfing industry.Scope of delivery: one fin without finscrew T-Zone

Wave fin for Single Fin Windsurf Boards. Lots of rake for maximum maneuverability and agile handling.This fin line provides good output for all wave conditions. Suitable for all flat water to wave conditions.Material: Epoxy Composite MoldedDeep: 230mmFin box system: US Box T-Zone fins are an OEM supplier product and equivalent to the accessory fins of most production boards in the windsurfing industry.Scope of delivery: one fin without finscrew T-Zone

Wave fin for Single Fin Windsurf Boards and Stand up Paddle Boards. Lots of rake for maximum maneuverability and agile handling.This fin line provides good output for all wave conditions. Suitable for all flat water to wave conditions.Material: Epoxy Composite MoldedDeep: 240mmFin box system: US Box T-Zone fins are an OEM supplier product and equivalent to the accessory fins of most production boards in the windsurfing industry.Scope of delivery: one fin without finscrew T-Zone

1 Set = 2 Fins. These Twinser fins feature a speed oriented fin design. short leading edge, less surface, less rake. This is what makes a fin fast and delivers control. On the other hand these fins are amazingly loose and they turn like nothing else. Their profile is kept slim to reduce drag providing the feel of a light and agile ride.145 = 3,0 - 4,7 sqm Sails155 = 3,5 - 5,0 sqm Sails165 = 4,2 - 5,5 sqm Sails175 = 5,3 - 6,8 sqm Sails Tekknosport

1 Set = 2 Fins. These Twinser fins feature a speed oriented fin design. short leading edge, less surface, less rake. This is what makes a fin fast and delivers control. On the other hand these fins are amazingly loose and they turn like nothing else. Their profile is kept slim to reduce drag providing the feel of a light and agile ride.145 = 3,0 - 4,7 sqm Sails155 = 3,5 - 5,0 sqm Sails165 = 4,2 - 5,5 sqm Sails175 = 5,3 - 6,8 sqm Sails Tekknosport

1 Set = 2 Fins. These Twinser fins feature a speed oriented fin design. short leading edge, less surface, less rake. This is what makes a fin fast and delivers control. On the other hand these fins are amazingly loose and they turn like nothing else. Their profile is kept slim to reduce drag providing the feel of a light and agile ride.145 = 3,0 - 4,2 sqm Sails155 = 3,5 - 5,0 sqm Sails165 = 4,2 - 5,5 sqm Sails175 = 5,3 - 6,8 sqm SailsTiefgang: 155mmMaterial: G-10Finbox System: Slot BoxLieferumfang: 2 Finnen mit Finnencover, ohne Finnenschraube Tekknosport

1 Set = 2 Fins. These Twinser fins feature a speed oriented fin design. short leading edge, less surface, less rake. This is what makes a fin fast and delivers control. On the other hand these fins are amazingly loose and they turn like nothing else. Their profile is kept slim to reduce drag providing the feel of a light and agile ride.145 = 3,0 - 4,2 sqm Sails155 = 3,5 - 5,0 sqm Sails165 = 4,2 - 5,5 sqm Sails175 = 5,3 - 6,8 sqm SailsTiefgang: 155mmMaterial: G-10Finbox System: US BoxLieferumfang: 2 Finnen mit Finnencover, ohne Finnenschraube Tekknosport

Masttop Plug female for Masttops with 22mm inside diameter Tekknosport

Masttop Plug male for Windsurf MastsLength: 3,5cmDiameter: 1,3mm Tekknosport