10 threaded inserts made of anodized brass for windsurf fins.12mm outer diameter, 6mm thread (M6)The thread inserts in windsurfing fins often break due to frequent use and salt water. With the help of a screwdriver you can replace the defective thread of most commercially available fins.Manufacturer: TekknosportMaterial: Chrome anodized brassScope of delivery: 10 threaded inserts Tekknosport

10 threaded inserts made of anodized brass for windsurf fins.9mm outer diameter, 6mm thread (M6)The thread inserts in windsurfing fins often break due to frequent use and salt water. With the help of a screwdriver you can replace the defective thread of most commercially available fins.Manufacturer: TekknosportMaterial: Chrome anodized brassScope of delivery: 10 threaded inserts Tekknosport

This surfboard fin key is used to loosen and tighten the fin screws that hold the tabs of the surfboard fin in place in the FUTURES fin plug.Content: 5 finkeys futures

Screws for Futures Finbox in SurfboardsContent: 5 screws futures

Banner TORQ Surfboards 90x300cm Torq TQ-BA

Disk for Windsurf Mastbases Tekknosport

Ersatz Clip für Tekknosport Mastextensions mit Pin System.Lieferumfang: Roter Clip mit Metallbügel, Feder Tekknosport

2+1 Fin setup for High Performance LongboardingThe Techflex 2+1 combines the best of high performance longboarding and traditional noseriding. This set is intended to be ridden as a thruster with the Techflex materials providing highspeed stability, while the center fin allows for maneuverability with a soft flex pattern through the tip.Template Category - Performance 2+1Construction - TechflexSize - Large LongboardContent: 3 Fins futures 8036-426-63

Original Futures Finbox 3/4 Inch Fin Boxes are for the front side fins of a thruster, quad, 5-fin or 2+1 set-up.3/4 Inch (1,905 cm) deep.Futures is proud to make one of the lightest and strongest fin system in the world! Our proven full-base system now features Interwoven Laminate Technology (ILT). These cut outs in the flange create an even stronger bond to the skin of the board by allowing the resin to weave itself between the surfboard and fiberglass skin.Content: 10 pieces incl screws futures F1-ILT-BLACK

Original Futures Finbox 3/4 Inch Fin Boxes are for the front side fins of a thruster, quad, 5-fin or 2+1 set-up.3/4 Inch (1,905 cm) deep.Futures is proud to make one of the lightest and strongest fin system in the world! Our proven full-base system now features Interwoven Laminate Technology (ILT). These cut outs in the flange create an even stronger bond to the skin of the board by allowing the resin to weave itself between the surfboard and fiberglass skin.Content: 10 pieces incl screws futures F1-ILT-GRAPHITE

Original Futures Finbox 3/4 Inch Fin Boxes are for the front side fins of a thruster, quad, 5-fin or 2+1 set-up.3/4 Inch (1,905 cm) deep.Futures is proud to make one of the lightest and strongest fin system in the world! Our proven full-base system now features Interwoven Laminate Technology (ILT). These cut outs in the flange create an even stronger bond to the skin of the board by allowing the resin to weave itself between the surfboard and fiberglass skin.Content: 10 pieces incl screws futures F1-ILT-WHITE

Original Futures Finbox ½ Inch for center fins.½ Inch (1,27 cm) deep.Futures is proud to make one of the lightest and strongest fin system in the world! Our proven full-base system now features Interwoven Laminate Technology (ILT). These cut outs in the flange create an even stronger bond to the skin of the board by allowing the resin to weave itself between the surfboard and fiberglass skin.Content: 10 pieces incl screws futures F2-ILT-BLACK

Original Futures Finbox ½ Inch for center fins.½ Inch (1,27 cm) deep.Futures is proud to make one of the lightest and strongest fin system in the world! Our proven full-base system now features Interwoven Laminate Technology (ILT). These cut outs in the flange create an even stronger bond to the skin of the board by allowing the resin to weave itself between the surfboard and fiberglass skin.Content: 10 pieces incl screws futures F2-ILT-GRAPHITE

Original Futures Finbox ½ Inch for center fins.½ Inch (1,27 cm) deep.Futures is proud to make one of the lightest and strongest fin system in the world! Our proven full-base system now features Interwoven Laminate Technology (ILT). These cut outs in the flange create an even stronger bond to the skin of the board by allowing the resin to weave itself between the surfboard and fiberglass skin.Content: 10 pieces incl screws futures F2-ILT-PURPLE

Original Futures Finbox ½ Inch for center fins.½ Inch (1,27 cm) deep.Futures is proud to make one of the lightest and strongest fin system in the world! Our proven full-base system now features Interwoven Laminate Technology (ILT). These cut outs in the flange create an even stronger bond to the skin of the board by allowing the resin to weave itself between the surfboard and fiberglass skin.Content: 10 pieces incl screws futures F2-ILT-WHITE

Box Fillers are designed to be placed into empty fin boxes when not in use. This most commonly occurs when riding a 5-Fin setup as either a thruster or quad, since all 5 boxes are not utilized at the same time.1/2 Inch high for flat futures box- Qty (2) Box fillers per package futures FILLER KIT 1/2

Box Fillers are designed to be placed into empty fin boxes when not in use. This most commonly occurs when riding a 5-Fin setup as either a thruster or quad, since all 5 boxes are not utilized at the same time.3/4 Inch high for deep futures box- Qty (2) Box fillers per package futures FILLER KIT 3/4

Futures is proud to present an updated version of the Strong box called the 1-Shot. The box is now molded as one solid piece with a CNC’d fin channel, rather than our previous two part design. The 1-Shot box is stronger, completely resistant to leaks and made using top of the line materials that have an incredible bond to polyester and epoxy resin.Long: 10,75 InchContent: 10 pieces without screw futures M-FLB10.75-BK

Futures is proud to present an updated version of the Strong box called the 1-Shot. The box is now molded as one solid piece with a CNC’d fin channel, rather than our previous two part design. The 1-Shot box is stronger, completely resistant to leaks and made using top of the line materials that have an incredible bond to polyester and epoxy resin.Long: 10,75 InchContent: 10 pieces without screw futures M-FLB10.75-WH

Futures is proud to present an updated version of the Strong box called the 1-Shot. The box is now molded as one solid piece with a CNC’d fin channel, rather than our previous two part design. The 1-Shot box is stronger, completely resistant to leaks and made using top of the line materials that have an incredible bond to polyester and epoxy resin.Long: 8 InchContent: 10 pieces without screw futures M-FLB8.0-BK

Futures is proud to present an updated version of the Strong box called the 1-Shot. The box is now molded as one solid piece with a CNC’d fin channel, rather than our previous two part design. The 1-Shot box is stronger, completely resistant to leaks and made using top of the line materials that have an incredible bond to polyester and epoxy resin.Long: 8 InchContent: 10 pieces without screw futures M-FLB8.0-WH

Original Futures Finbox ½ Inch for center fins.½ Inch (1,27 cm) deep.Finbox für Suft SurfboardsContent: 10 pieces incl screws futures SB-F2-Black

Original Futures Finbox 3/4 Inch Fin Boxes are for the front side fins of a thruster, quad, 5-fin or 2+1 set-up.3/4 Inch (1,905 cm) deep.Finbox für Suft SurfboardsContent: 10 pieces incl screws futures SB-F1-Black

The HS 2+1 fin is highly unique and versatile, and was designed specifically for use with the Haydenshapes Plunder model. The Plunder can be ridden as a single fin using only the HS 2+1 center, giving you a flowing feel with plenty of pivot around the fin during turns. To create a little extra speed, a 2+1 setup can be arranged, giving the board a blend of the thruster feel with the traditional single fin setup.Content: 3 Fins futures 8033-311-63

The HS 2+1 fin is highly unique and versatile, and was designed specifically for use with the Haydenshapes Plunder model. The Plunder can be ridden as a single fin using only the HS 2+1 center, giving you a flowing feel with plenty of pivot around the fin during turns. To create a little extra speed, a 2+1 setup can be arranged, giving the board a blend of the thruster feel with the traditional single fin setup.Content: 3 Fins futures 8034-311-63

The Hatchet 2+1 is the ultimate set-up for high performance longboarding. Made from lightweight honeycomb and featuring Futures’ V2 foil in the side bites and a 6” Cutaway center fin. The Hatchet 2+1 set simulates the freedom of riding a much smaller board, allowing you to get your board more vertical. The Hatchet has a unique 50-1 foil that is noticeable thicker, which allows for more lift and fluid rail to rail linkage.Content: 3 Fins futures 8153-158-63

Futures' G10 Series fins are the top of the line speed control fins, used by the who’s who of the global big wave scene. Dorian, Twiggy, Florence, Mitchell, Long, Healey, Walsh and many more trust nothing else when everything is on the line. Made from epoxy resin and compressed fiberglass, the G10 Series features Futures’ engineered tow foils designed to reduce cavitation through highly efficient water flow, resulting in reduced drag, increased control and maneuverability at extremely high speeds. Futures G10 is the pinnacle of big wave fin technology.SPECIFICATIONSSide Fins Rear FinArea 10.11 10.11Height 3.75 3.75Base 3.63 3.63Foil TOW TOWContent: 4 Fins futures 1615-500-40

Futures' G10 Series fins are the top of the line speed control fins, used by the who’s who of the global big wave scene. Dorian, Twiggy, Florence, Mitchell, Long, Healey, Walsh and many more trust nothing else when everything is on the line. Made from epoxy resin and compressed fiberglass, the G10 Series features Futures’ engineered tow foils designed to reduce cavitation through highly efficient water flow, resulting in reduced drag, increased control and maneuverability at extremely high speeds. Futures G10 is the pinnacle of big wave fin technology.SPECIFICATIONSSide Fins Rear FinArea 11.59 11.59Height 4.00 4.00Base 3.89 3.89Foil TOW TOWContent: 4 Fins futures 1616-500-40

Futures' G10 Series fins are the top of the line speed control fins, used by the who’s who of the global big wave scene. Dorian, Twiggy, Florence, Mitchell, Long, Healey, Walsh and many more trust nothing else when everything is on the line. Made from epoxy resin and compressed fiberglass, the G10 Series features Futures’ engineered tow foils designed to reduce cavitation through highly efficient water flow, resulting in reduced drag, increased control and maneuverability at extremely high speeds. Futures G10 is the pinnacle of big wave fin technology.SPECIFICATIONSSide Fins Rear FinArea 14.52 11.59Height 4.48 4.00Base 4.36 3.89Foil TOW TOWContent: 4 Fins futures 1617-500-40

Futures' G10 Series fins are the top of the line speed control fins, used by the who’s who of the global big wave scene. Dorian, Twiggy, Florence, Mitchell, Long, Healey, Walsh and many more trust nothing else when everything is on the line. Made from epoxy resin and compressed fiberglass, the G10 Series features Futures’ engineered tow foils designed to reduce cavitation through highly efficient water flow, resulting in reduced drag, increased control and maneuverability at extremely high speeds. Futures G10 is the pinnacle of big wave fin technology.SPECIFICATIONSCenter FinArea 20.34Height 5.97Base 4.72Foil SYMMContent: 1 Fin futures 1620-500-02

Futures' G10 Series fins are the top of the line speed control fins, used by the who’s who of the global big wave scene. Dorian, Twiggy, Florence, Mitchell, Long, Healey, Walsh and many more trust nothing else when everything is on the line. Made from epoxy resin and compressed fiberglass, the G10 Series features Futures’ engineered tow foils designed to reduce cavitation through highly efficient water flow, resulting in reduced drag, increased control and maneuverability at extremely high speeds. Futures G10 is the pinnacle of big wave fin technology.SPECIFICATIONSSide Fins Center FinArea 14.51 15.85Height 4.48 4.84Base 4.36 4.53Foil TOW SYMMContent: 3 Fins futures 1618-500-00

the who’s who of the global big wave scene. Dorian, Twiggy, Florence, Mitchell, Long, Healey, Walsh and many more trust nothing else when everything is on the line. Made from epoxy resin and compressed fiberglass, the G10 Series features Futures’ engineered tow foils designed to reduce cavitation through highly efficient water flow, resulting in reduced drag, increased control and maneuverability at extremely high speeds. Futures G10 is the pinnacle of big wave fin technology.SPECIFICATIONSSide Fins Center FinArea 10.08 15.86Height 3.73 4.84Base 3.63 4.53Foil TOW SYMMContent: 3 Fins futures 1614-500-00

QUAD BALANCED RIDE NUMBER 5.7The Controller Alpha is a large size quad set with a Ride Number of 5.7. Designed specifically for the classic, wide-tailed retro board the Alpha Controller is effectively a split keel and offers a unique blend of twin and quad characteristics. The C6 material, V2 foil and large surface area create both drive and control, while the upright rear template mixes in a skatey feel to the set as a whole. All Alpha products are designed and manufactured exclusively in Huntington Beach, Ca USA.SPECIFICATIONSSide Fins Rear FinArea 18.24 12.06Height 4.50 4.53Base 5.05 3.89Foil V2 80/20Content: 4 Fins futures 1200-327-40

QUAD BALANCED RIDE NUMBER 6.9The Controller is a split keel quad setup designed specifically for use in wide tail fish designs. The honeycomb & bamboo construction, V2 foil and large surface area are great for generating speed and maintaining it through a sequence of turns. With the upright positioning of the quad rears, there is a skatey feel to the set, similar to a twin keel, but with more control.SPECIFICATIONSSide Fins Rear FinArea 18.24 12.06Height 4.50 4.53Base 5.05 3.89Foil V2 80/20Content: 4 Fins futures 1200-154-40

QUAD REAR SPEED GENERATING RIDE NUMBER 7.2The HS 4.20 Generation Series, designed by Hayden Cox, is a large size Speed Generating quad rear set with a Ride Number of 7.2. This unique set of rears features Hayden's unique 80/20 foil with splayed tips. The top inch of the fin tweaks out toward the rail, creating a looser feel for the relatively large size template. Looking to turn your favorite Thruster set into a Quad? This pair of Quad Rears can be combined with any Futures front fins to suit your riding preference, board design and waves.SPECIFICATIONSRear FinArea 12.09Height 4.21Base 3.99Foil CUSTOMContent: 2 Fins futures 2488-410-47

5 FIN BALANCED RIDE NUMBER 5.3 (tri) / 5.1 (quad)The F4 Honeycomb Series 5-Fin set, is a small balanced quad/thruster combo with a Ride Number of 5.3 (tri) / 5.1 (quad).Allow for the original characteristics of your board to shine, without any directional influence.SPECIFICATIONSHoneycomb ConstructionSide Fins Center Fin Rear FinArea 14.22 14.22 10.73Height 4.37 4.37 3.76Base 4.22 4.22 3.71Foil FLAT SYMM SYMMContent: 5 Fins futures 1140-182-50

5 FIN BALANCED RIDE NUMBER 6.4 (tri) / 4.9 (quad)The F4 Honeycomb Series 5-Fin set, is a small balanced quad/thruster combo with a Ride Number of 6.4 (tri) / 4.9 (quad).Allow for the original characteristics of your board to shine, without any directional influence.SPECIFICATIONSSide Fins Center Fin Rear FinArea 15.12 15.12 11.67Height 4.56 4.56 4.05Base 4.35 4.35 3.87Foil FLAT SYMM SYMMContent: 5 Fins futures 1165-182-50

5 FIN BALANCED RIDE NUMBER 5.6 (tri) / 5.4 (quad)The F8 Legacy 5-fin is a large sized set in the Neutral template category. The Honeycomb construction gives a balanced feel for all-around performance. The rear fins are the QD2 4.15 with Symmetrical foil. The 5-fin set is designed to be ridden as either a Thruster or Quad set-up, packaged together for more versatility through your quiver.Template Category | Neutral (balanced, all-around)Construction | HoneycombRide Number | Balanced – 5.6 (tri) / 5.4 (quad)Size | Large (180+ lbs)SPECIFICATIONSSide Fins Center Fin Rear FinArea 15.90 15.90 12.60Height 4.64 4.64 4.15Base 4.47 4.47 4.16Foil FLAT SYMM SYMMContent: 5 Fins futures 1175-182-50

5 FIN BALANCED RIDE NUMBER 6.93 FIN BALANCED RIDE NUMBER 6.4The F4 Alpha 5-fin is a small sized set in the Neutral template category. Made in Huntington Beach, the Alpha product line combines Bureo’s NetPlus recycled fishing nets with Futures’ Compound 6 carbon and air infused technology, offering stability and control at top speed. The rear fins are QD2 3.75 with Symmetrical foil. The 5-fin set is designed to be ridden as either a Thruster or Quad set-up, packaged together for more versatility through your quiver. Template Category - Neutral (all-around, versatile)Construction - Alpha (NetPlus)Ride Number - Balanced – 6.4 (tri) / 6.9 (quad)Suggested Wave Type - All types, All conditionsSize - Small (45-60 kg)SPECIFICATIONSSide Fins Center Fin Rear FinArea 14.22 14.22 10.73Height 4.37 4.37 3.76Base 4.22 4.22 3.71Angle 6.5 SYMM 3.0Foil FLAT SYMM SYMMContent: 5 Fins futures 1140-337-50

4 FIN BALANCED RIDE NUMBER 6.93 FIN BALANCED RIDE NUMBER 6.8The F4 Alpha 5-fin is a medium sized set in the Neutral template category. Made in Huntington Beach, the Alpha product line combines Bureo’s NetPlus recycled fishing nets with Futures’ Compound 6 carbon and air infused technology, offering stability and control at top speed. The rear fins are QD2 3.75 with Symmetrical foil. The 5-fin set is designed to be ridden as either a Thruster or Quad set-up, packaged together for more versatility through your quiver. Template Category - Neutral (all-around, versatile)Construction - Alpha (NetPlus)Ride Number - Balanced – 6.8 (tri) / 6.9 (quad)Suggested Wave Type - All types, All conditionsSize - Medium (55-80 kg)SPECIFICATIONSSide Fins Center Fin Rear FinArea 15.12 15.12 11.67Height 4.56 4.56 4.05Base 4.35 4.35 3.87Angle 6.5 SYMM 3.0Foil FLAT SYMM SYMMContent: 5 Fins futures 1165-338-50